Outdoor Wall Lights & Outdoor Wall Lighting

Mouse Lights # Mouse - IP66

The Mouse Lite™ is a solid bronze or solid 316 stainless steel luminaire for surface mounting.
The shape is pleasing to the eye and blends unobtrusively into any situation. A space in the wall behind the luminaire is not required for a cable connection due to the design which includes a cable junction cavity. There is no light directed upward or forward into the eye.

Individually cast in bronze, giving each luminaire a unique finish and identity.

Also available in sateened 316 stainless steel with frosted tempered glass lens and high temperature gasket.

Suitable for use with a G4 bi-pin lamp - 5, 10, 20 watt and is supplied with a high quality European lamp.

Accessories: Cable joint kit #CJK150.

Power Supply - HUNZA® Buriable IG20 safety isolating transformer (single installation), multi installation with IG40, IG50,IG100,IG150 or IG200 safety isolating transformers or HUNZA® Wall Mount series WMl00 - WM300 Double Insulated Safety Isolating Transformers.

click on image to enlarge

Click here for Light Effect

Download Spec Sheet

Price:

Mouse

Bronze: £106.93

Stainless Steel: £131.60

Satined Stainless Steel: £135.13

Including V.A.T

Mouse Lite™ Square # Mousesq - IP66

The Mouse Lite™ Square is a solid bronze or solid 316 stainless steel luminaire for surface mounting.
It has a strong square shape suited to present day installations .

A space in the wall behind the luminaire is not required for a cable connection due to the design which includes a cable junction cavity.

There is no light directed upward or forward into the eye.

Individually cast in bronze, giving each luminaire a unique finish and identity.

Also available in sateened 316 stainless steel with frosted tempered glass lens and high temperature gasket.

Suitable for use with a G4 bi-pin lamp - 5, 10, 20 watt and is supplied with a high quality European lamp.

Accessories: Cable joint kit #CJK150, RETRO™ transformer 240 volt #/R.

RETRO™ Fit Installation - #MOUSESQ

An installation where mounting a transformer is a problem, e.g. a brick wall where there is only the cable protruding out of the wall and it is not an option to recess the transformer or when replacing an existing light fitting, the Mouse Lite ™Square (available in 1 x 20 watt) is available with an approved 240/250 volts ac encapsulated IP66 dimmable transformer built into the base.

click on image to enlarge

Click here for Light Effect

Download Spec Sheet

Price:

Mousesq

Bronze: £171.55

Stainless Steel: £188.00

Including V.A.T

Pagoda Lights # PGL - IP66

The Pagoda Lite produces a general lighting effect.
This luminaire is not for directional lighting. The lens is manufactured from high UV stable acrylic with stainless anti-glare mesh. Suitable for mounting on timber, stone, brick, etc. Has a 78mm mounting base (complete with stainless steel screws).

Solidly constructed from 10mm thick aluminium with a UV stable powder coated finish (standard colours bronze, green, matt black, silver and white ) or solid copper or 316 stainless steel with high temperature silicon gaskets.

Suitable for use with a G4 halogen lamp - 10, 20 watt and is supplied with a high quality European lamp.

Accessories: Cable joint kit #CJK150, Florescent Option #FL. A 5 watt self ballasted 240 volt fluorescent option is available which offers excellent light output, low energy usage, long lamp life and very low heat generation.

Power Supply - HUNZA® Wall Mount series WM100 - WM300 Double Insulated Safety Isolating Transformers. For internal mounting use HUNZA® H20 or H50 internal transformers.

RETRO™ Fit Installation - #PGL/R

An installation where mounting a transformer is a problem, e.g. a brick wall where there is only the cable protruding out of the wall and it is not an option to recess the transformer or when replacing an existing light fitting, the Pagoda Lite (available in 1 x 20 watt) is available with an approved 240/250 volts ac encapsulated IP66 dimmable transformer built into the base. The base size increases to 78mm diameter and 48mm deep.

click on image to enlarge

Click here for Light Effect

Download Spec Sheet

Price:

PGL

Powder Coated: £86.95

Solid Copper: £128.08

Stainless Steel: £145.70

Satined Stainless Steel: £149.23

PGLfl

Powder Coated: £86.95

Solid Copper: £128.08

Stainless Steel: £145.70

Satined Stainless Steel: £149.23

PGL/R

Powder Coated: £131.60

Solid Copper: £205.63

Stainless Steel: £240.88

Satined Stainless Steel: £246.75

Including V.A.T

Pillar Lights # PIL - IP66

The Pillar Lite illuminates both upwards and downwards, giving columns, gateway pillars and entrances a dramatic effect.
Machined from 10mm thick aluminium with a 78mm diameter mounting base, complete with stainless steel screws and is available in either a UV stable powder coated finish (standard colours bronze, green matt black, silver and white) or solid copper or 316 stainless steel with high temperature silicon gaskets.

Suitable for use with MR16 - 2 x 20 watt lamps and is supplied with high quality European 5000 hour lamps.

Lifetime Warranty on Lens Breakage

Accessories: Cable Joint Kit #CJK150, Frosted Lens #DFL, Glare guard #GG, Hex Cell Louvre Adaptor #HCL.

Power Supply - HUNZA® Wall Mount series WM100 - WM300 Double Insulated Safety Isolating Transformers. For internal mounting use 1 x HUNZA® H40 internal transformer.

RETRO™ Fit Installation # PIL/R

An installation where mounting a transformer is a problem, e.g. a brick wall where there is only the cable protruding out of the wall and it is not an option to recess the transformer or when replacing an existing light fitting, the Pillar Lite (available in 2 x 20 watt) is available with an approved 240/250 volts ac encapsulated IP66 dimmable transformer built into the base. The base size increases to 78mm diameter and 48mm deep.

click on image to enlarge

Click here for Light Effect

Download Spec Sheet

Price:

PIL

Powder Coated: £110.45

Solid Copper: £170.38

Stainless Steel: £190.35

Satined Stainless Steel: £195.05

PIL/R

Powder Coated: £158.63

Solid Copper: £247.93

Stainless Steel: £267.90

Satined Stainless Steel: £273.78

Including V.A.T

Wall Down Lights # DL - IP66

Suitable for mounting on timber, masonry, stone, etc. Non adjustable for one way wall washing, can be mounted with the lamp directed up or down.
Water resistant with a 78mm diameter mounting base, complete with stainless steel screws.

Machined from 10mm thick aluminium with a UV stable powder coated finish (standard colours bronze, green, matt black, silver and white) or solid copper, or 316 stainless steel, clear tempered glass lens and high temperature silicon gaskets.

Suitable for use with an MR16 - 20 , 35 or 50 watt lamp and is supplied with a high quality European 5000 hour lamp.

Lifetime Warranty on Lens Breakage

Accessories: Cable Joint Kit #CJK150, Frosted Glass Lens #DFL, Glare Guard #GG, Hex Cell Louvre Adaptor #HCL, LED arrary #LED, LED 240v Transformer (fits inside the luminaire) #T/LED.

Power Supply - HUNZA® Wall Mount series WM100 - WM300 Double Insulated Safety Isolating Transformers. For internal mounting use HUNZA® H20 or H50 internal transformers.

RETRO™ Fit Installation #DL/R

An installation where mounting a transformer is a problem, e.g. a brick wall where there is only the cable protruding out of the wall and it is not an option to recess the transformer or when replacing an existing light fitting, the Wall Down Lite (available in 1 x 20 ,35, 50 watt) is available with an approved 240/250 AC encapsulated IP66 dimmable transformer built into the base. The base size increases to 78mm diameter and 48mm deep.

click on image to enlarge

Click here for Light Effect

Download Spec Sheet

Price:

Powder Coated: £84.60

Solid Copper: £128.08

Stainless Steel: £137.48

Satined Stainless Steel: £139.83

DL/R

Powder Coated: £131.60

Solid Copper: £205.63

Stainless Steel: £230.30

Satined Stainless Steel: £236.18

Including V.A.T

Wall Spot # WS - IP66

Suitable for mounting on timber, masonry, stone, etc. Fully adjustable arm allowing 360 degree rotation and 0 - 90 degree elevation.
It is water resistant with a 78mm diameter mounting base, complete with stainless steel screws.

Suitable for use with an MR16 - 20, 35 or 50 watt lamp and is supplied with a high quality European 5000 hour lamp.

Lifetime Warranty on Lens Breakage

Accessories: Cable Joint Kit #CJK150, Frosted Glass Lens #DFL, Glare Guard #GG, Hex Cell Louvre Adaptor #HCL.

Power Supply - HUNZA® Wall Mount series WM100 - WM300 Double Insulated Safety Isolating Transformers. For internal mounting use HUNZA® H20 or H50 internal transformers.

RETRO™ Fit Installation #WS/R

An installation where mounting a transformer is a problem, e.g. a brick wall where there is only the cable protruding out of the wall and it is not an option to recess the transformeror when replacing an existing light fitting, the Wall Spot (available in 1 x 20 , 35, 50 watt) is available with an approved 240/250 AC encapsulated IP66 dimmable transformer built into the base. The base size increases to 78mm diameter and 48mm deep.

click on image to enlarge

Click here for Light Effect

Download Spec Sheet

Price:

Powder Coated: £84.60

Solid Copper: £131.60

Stainless Steel: £185.65

Satined Stainless Steel: £189.18

WS/R

Powder Coated: £133.95

Solid Copper: £205.63

Stainless Steel: £257.33

Satined Stainless Steel: £264.38

Including V.A.T

Twin Wall Spot # TWS - IP66

Suitable for mounting on timber, stone, brick, etc.
The two individual spotlights can be aimed in entirely different directions and are water-resistant. It has a 78mm mounting base .
Machined from 10mm thick aluminium with a UV stable powder coated finish (standard colours bronze, green, matt black, silver and white) or solid copper, or 316 stainless steel, clear tempered glass lenses with high temperature silicon gaskets and fully adjustable arms allowing 360 degree rotation and 0 - 90 degree elevation.

Suitable for use with MR16 - 20, 35 or 50 watt lamps and is supplied with high quality European 5000-hour lamps.

Lifetime Warranty on Lens Breakage

Accessories: Cable Joint Kit #CJK150, Frosted Lens #DFL, Glare Guard #GG, Hex Cell Louvre Adaptor #HCL.

Power Supply - HUNZA® Wall Mount series WM100 - WM300 Double Insulated Safety Isolating Transformers. For internal mounting use 1 x HUNZA® H40 or 2 x H50 internal transformers.

RETRO™ Fit Installation - #TWS/R

An installation where mounting a transformer is a problem, e.g. a brick wall where there is only the cable protruding out of the wall and it is not an option to recess the transformer or when replacing an existing light fitting, the Twin Wall Spot (only available in 2 x 20 watt) is available with an approved 240/250 AC encapsulated IP66 dimmable transformer built into the base. The base size increases to 78mm diameter and 48mm deep.

click on image to enlarge

Download Spec Sheet

Price:

TWS

Powder Coated: £129.25

Solid Copper: £203.28

Stainless Steel: £363.08

Satined Stainless Steel: £371.30

TWS/R

Powder Coated: £171.55

Solid Copper: £257.33

Stainless Steel: £437.10

Satined Stainless Steel: £446.50

Including V.A.T

Euro Wall Spot # ESWS - IP66

The Euro Wall Spot has a fully adjustable arm allowing 3600 rotation and 0 - 900 elevation. For situations where the luminaire needs to be more discreet a smaller sized MR11 lamp is utilisied to achieve this.
Machined from 45mm solid copper, or 316 stainless steel, clear tempered glass lens with high temperature silicon gaskets and a fully adjustable arm allowing 360 degree rotation and 0- 90 degree rotation. It has a 78mm diameter mounting base.

Suitable for use with MR11 - 5, 10 or 20 watt lamp.

Lifetime Warranty on Lens Breakage

Accessories: Cable Joint Kit#CJK150, Frosted Lens #EFL
.
Power Supply - HUNZA® Wall Mount series WM100 - WM300 Double Insulated Safety Isolating Transformers. For internal mounting use HUNZA® H20 or H50 internal transformers.

RETRO™ Fit Installation #ESWS/R

An installation where mounting a transformer is a problem, e.g. a brick wall where there is only the cable protruding out of the wall and it is not an option to recess the transformer or to replace an existing light fitting, the Euro Wall Spot (available in 1 x 20 watt) is available with an approved 240/250 AC encapsulated IP66 dimmable transformer built into the base. The base size increases to 78mm diameter and 48mm deep.

click on image to enlarge

Click here for Light Effect

Download Spec Sheet

Price:

ESWS

Solid Copper: £121.03

Stainless Steel: £225.60

Satined Stainless Steel: £231.48

ESWS/R

Solid Copper: £146.88

Stainless Steel: £300.80

Satined Stainless Steel: £309.03

Including V.A.T

Euro Twin Wall Spot # ETWS - IP66

Suitable for mounting on timber, stone, brick, etc. The two individual spotlights can be aimed in entirely different directions and are water-resistant.
It has a 78mm mounting base (complete with stainless steel screws).
Machined from 45mm solid copper, or 316 stainless steel, clear tempered glass lenses with high temperature silicon gaskets and fully adjustable arms allowing 360 degree rotation and 0- 90 degree rotation.

Suitable for use with MR11- 2 x 5,10 or 20 watt lamps .

Lifetime Warranty on Lens Breakage

Accessories: Cable Joint Kit#CJK150, Frosted Lens #EFL .

Power Supply - HUNZA® Wall Mount series WM100 - WM300 Double Insulated Safety Isolating Transformers. For internal mounting use 1 x HUNZA® H40 internal transformer.

RETRO™ Fit Installation #ETWS/R

An installation where mounting a transformer is a problem, e.g. a brick wall where there is only the cable protruding out of the wall and it is not an option to recess the transformer or to replace an existing light fitting, the Euro Wall Spot (available in 1 x 20 watt) is available with an approved 240/250 AC encapsulated IP66 dimmable transformer built into the base. The base size increases to 78mm diameter and 48mm deep.

click on image to enlarge

Download Spec Sheet

Price:

ETWS

Solid Copper: £215.03

Stainless Steel: £414.78

Satined Stainless Steel: £424.18

ETWS/R

Solid Copper: £273.78

Stainless Steel: £501.73

Satined Stainless Steel: £513.48

Including V.A.T

E-Lite #E-Lite

The E-Lite is ideal for lighting eaves, soffits, entrance ways, verandahs, bathrooms and kitchens.

The E-Lite is machined from 316 stainless steel, cooper or high corrosion resistant UV stable powder coated aluminium.

click on image to enlarge

Click here for Light Effect

Download Spec Sheet

Price:

E-Lite

Powder Coated: £57.58

Solid Copper: £82.25

Stainless Steel: £92.83

Including V.A.T

Sign-Lite - #SGNL - #SGNL/R

For lighting signs, wall displays and building highlights etc.
An adjustable head mounted on a 500mm arm.

Available in 12 volt or a built in 240 volt transformer (Retro™) option is available. Supplied in UV stable powder coated aluminium, solid copper or 316 stainless steel.

click on image to enlarge

Download Spec Sheet

Price:

SGNL

Powder Coated: £108.10

Solid Copper: £152.75

Stainless Steel: £215.03

SGNL/R

Powder Coated: £162.15

Solid Copper: £243.23

Stainless Steel: £299.63

Including V.A.T