 |
| Marine Lights, Pond Lights & Pool Lights |
|
Pond Light #Pond - IP68 Pond Lite is fully submersible
and is adjustable on two planes. Using a Pond Lite to light a waterfall
creates life in the water and brings serenity to the surroundings.
Tested and approved to IP68. Machined from 10mm thick aluminium with a UV stable powder coated finish (standard colours green, matt black, silver and white) or machined from solid copper or 316 stainless steel, stainless steel cap screws, clear tempered glass lens and high temperature silicon gaskets and is complete with three metres of submersible cable (other lengths available on request). Suitable for use with MR16 - 20, 35 or 50 watt lamps and is supplied with a high quality European 5000 hour lamp. Lifetime Warranty on Lens Breakage Accessories: Cable Joint Kit #CJK150, Frosted Lens #DFL, Glare Guard #GG, Hex Cell Louvre Adaptor #HCL, LED Array #LED, LED Transformer #IG20LED, Weighted Base #/W. Power Supply - HUNZA® Buriable IG20 safety isolating transformer (single installation), or multi installation with IG40, IG100, IG150 or IG200 safety isolating transformers or HUNZA® Wall Mount series WM100 - WM300 Double Insulated Safety Isolating Transformers. PLEASE NOTE: Pool chemicals, hard water or salt water may damage the powder coated finish. Stainless steel fittings should be used in these situations. Copper luminaires are not suitable in a pond with fish. |
click on image to enlarge
Price: POND Powder Coated: £91.48 Solid Copper: £128.57 Stainless Steel: £153.30 |
|
|
||
|
Pond Light Weighted #Pond/W - IP68
Machined from 10mm thick aluminium with a UV stable powder coated finish (standard colours green, matt black, silver and white) or machined from solid copper or 316 stainless steel, stainless steel cap screws, clear tempered glass lens and high temperature silicon gaskets and is complete with three metres of submersible cable (other lengths available on request). Suitable for use with MR16 - 20, 35 or 50 watt lamps and is supplied with a high quality European 5000 hour lamp. Lifetime Warranty on Lens Breakage Accessories: Cable Joint Kit #CJK150, Frosted Lens #DFL, Glare Guard #GG, Hex Cell Louvre Adaptor #HCL, LED Array #LED, LED Transformer #IG20LED, Weighted Base #/W. Power Supply - HUNZA® Buriable IG20 safety isolating transformer (single installation), or multi installation with IG40, IG100, IG150 or IG200 safety isolating transformers or HUNZA® Wall Mount series WM100 - WM300 Double Insulated Safety Isolating Transformers. PLEASE NOTE: Pool chemicals, hard water or salt water may damage the powder coated finish. Stainless steel fittings should be used in these situations. Copper luminaires are not suitable in a pond with fish. |
click on image to enlarge
Price: POND/W Powder Coated: £96.43 Solid Copper: £137.22 Stainless Steel: £166.89 Including V.A.T |
|
|
|
||
|
Pool Light #PL - IP68 This luminaire is electro-
polished, and is supplied with a multi-purpose PVC mounting canister.
It can be installed in three different types of pool wall: The luminaire is held into the Wet Niche PVC canister by two 'O' rings. This means there are no mounting screws in the flange to spoil the aesthetics of the luminaire. Up to 600mm of cable can be coiled up inside the mounting canister, enabling lamp changing above the water line. The Pool Lite is machined from 9mm thick 316 stainless steel with a tempered glass lens, high temperature silicon gaskets, and is supplied with an engineering grade PVC mounting canister (wet niche). Complete with six metres of submersible cable (other lengths available on request). Suitable for use with MR16 - 20, 35, 50 watt lamps and is supplied with a high quality European 5000 hour lamp. Lifetime Warranty on Lens Breakage Accessories: Cable Joint Kit #CJK150, Frosted Lens #DFL, Hex Cell Louvre Adaptor #HCL. Power Supply - HUNZA® H20, H40 and H50 for internal mounting only. .Check with your Local Electrical Authority for pool zone installation regulations. Warning - out
of balance pool chemicals may cause the fitting to corrode at a rapid
rate. In the case of salt water an increase in water temperature of
10 degrees will double the corrosion factor. 316 stainless steel is
suitable for situations of up to 1000 parts per million of chloride.
Where an automatic chlorinator is employed an excess amount of chlorine
may be produced. |
click on image to enlarge
Price: PLSS Stainless Steel: £273.21 Including V.A.T |
|
|
|
||
|
Marine Cabin Light #CL - IP 66 The marine lites are supplied with a mounting
canister that facilitates ease of installation. The aluminium mounting canister is anodised for protection and is open at the top to allow heat to escape. The IP rating of the cabin lite is IP66 but the mounting canister is open at the top, therefore it is only suitable for interior. The Marine Lites are machined from 316 stainless steel with tempered glass lenses, silicon gaskets, and are supplied with a marine grade aluminium or PVC mounting canister and lock ring. Suitable for use with a G4 bi-pin lamp 5,10, 20w lamps, is supplied with a high quality European lamp. Lifetime Warranty on Lens Accessories: Cable Joint kit #CJK1 50, LED Array #LED, Frost Lens #EFL. Power Supply - HUNZA® H20 and H50 for internal mounting only.
|
click on image to enlarge
Price: CL Stainless Steel: £201.51 Including V.A.T |
|
|
|
||
|
Marine Cockpit Light #CPL - IP 66 The marine lites are supplied with a mounting canister
that facilitates ease of installation. The marine grade aluminium mounting canister is anodised
for protection and is fully enclosed with a cable gland which clamps
the cable to maintain IP66 rating, if the cockpit fills with water
the canister will not compromise the cockpit’s waterproof integrity. Suitable for use with a G4 bi-pin lamp 5 watt lamp and is supplied with a high quality European lamp. The Marine Lites are machined from 316 stainless steel with tempered glass lenses, silicon gaskets, and are supplied with a marine grade aluminium or PVC mounting canister and lock ring. Lifetime Warranty on Lens Accessories: Cable Joint kit #CJK1 50, LED Array #LED, Frost Lens #EFL. Power Supply - HUNZA® H20 and H50 for internal mounting only. |
click on image to enlarge
Price: CPL Stainless Steel: £208.93 Including V.A.T
|
|
