Driveway lights, driveway lighting, outdoor lighting fixtures, garden lighting

Driveway Lights & Driveway Lighting

Path Light# PL - IP68

The Path Lite is ideal for lighting flat areas, decks, paved courtyards, edge lighting paths. This luminaire has a low profile (20mm) and directs light horizontally via a stainless steel reflector cone through a frosted glass lens to reduce glare.
Available with 1, 2, 3 or 4 facets for light to be projected through. The Path Light 2 facet may be used as a Step Lite in a wall or fence, etc. to shine light up and down as it protrudes only 20mm.

Machined from a solid block of copper or 316 stainless steel with stainless steel reflector, frosted tempered glass lens and high temperature silicon gaskets.

For use with an MR16 - 20 watt lamp and is supplied with a high quality European 5000 hour lamp.

A 5 watt self ballasted 240 volt fluorescent option is available which offers excellent light output, low energy usage, long lamp life and very low heat generation. This changes the luminaire to an IP66 rating.

Lifetime Warranty on Lens Breakage

Accessories: Cable Joint Kit #CJK150, Deck Canister #DKCAN, Floor Lite Canister #FLCAN, or #CANSS (316 stainless), 5 watt Fluorescent Option #FL, Fluorescent Canister PVC #FLUCAN .

Power Supply - HUNZA® Buriable IG20 safety isolating transformer (single installation), multi installation with IG40, IG100 or IG200 safety isolating transformers or HUNZA® Wall Mount series WMl00 - WM3OO Double Insulated Safety Isolating Transformers.

click on image to enlarge

Click here for Light Effect

Download Spec Sheet

Price:

With 148mm Canister

Solid Copper: £217.38

Stainless Steel: £273.78

Without Canister

Solid Copper: £182.13

Stainless Steel: £239.70

PLfl

With 213mm Canister

Solid Copper: £222.08

Stainless Steel: £329.00

Without Canister

Solid Copper: £188.00

Stainless Steel: £294.93

Including V.A.T

Driveway Light# DWL - IP66

A luminaire designed to mount flush with the level of the driveway, pathway, hotel floors or building foyers - there is no lip to trip over.
The Driveway Lite is supplied with a mounting canister that facilitates ease of installation. The luminaire can be driven over or walked upon without damaging it.

Designed so the lamp can be directed up at a bush, tree, or the outside of a building, etc. without the need to remove the fitting from the canister due to the three vandal-resistant allen head screw fixing system which attaches the flange to the body of the luminaire.

This luminaire has a solid bronze or 316 stainless steel flange with a powder coated black body.

This luminaire has a ‘Flush Fit’ lens which stops water pooling and depositing dirt on the lens. Solidly constructed body cast from aluminium with UV stable powder coat, with a ‘Flush Fit’ 10mm thick tempered glass lens and silicon gasket. The lamp can be aimed up to 20 degrees without removing the fitting from the canister.

Suitable for use with MR16 - 20, 35 or 50 watt lamp and is supplied with a high quality European 5000 hour lamp. Lifetime Warranty on Lens Breakage

Accessories: Cable Joint Kit #CJK150, Frosted Lens #LLFR.

Power Supply - HUNZA® Buriable IG20 or IG50 safety isolating transformer (single installation) or multi installation with IG40, IG100, IG150 or IG200 safety isolating transformers or HUNZA® Wall Mount series WM100 - WM300 Double Insulated Safety Isolating Transformers.

Note: Solid bronze flange will age individually over time.

click on image to enlarge

Click here for Light Effect

Download Spec Sheet

Price:

DWL

Solid Bronze: £176.25

Stainless Steel: £215.03

Including V.A.T

Lawn Light # LL - IP66

The Lawn Lite is designed for insertion into a lawn or garden bed and can be mowed over without damaging it.
Designed so the lamp can be directed up to 20 degrees at a bush , tree, or the outside of a building, etc. without the need to remove the luminaire from the ground or deck due to the three vandal-resistant allen head screw fixing system which attaches the flange to the body of the luminaire.

The Lawn Lite has a “Flush Fit” lens which stops water pooling and depositing dirt on the lens.
It is solidly constructed from cast aluminium with either a UV stable powder coated finish (standard colours bronze, green, matt black and silver) or with a solid bronze or 316 stainless steel flange and powder coated black body.

It has a 10mm thick ‘Flush Fit’ tempered glass lens and a silicon gasket.

Suitable for use with an MR16 - 20 ,35 or 50 watt lamp and is supplied with a high quality European 5000 hour lamp.

Lifetime Warranty on Lens Breakage

Accessories: Cable Joint Kit #CJK150, Frosted Lens #LLFR.

click on image to enlarge

Click here for Light Effect

Download Spec Sheet

Price:

Powder Coated: £123.38

Bronze: £176.25

Stainless Steel: £215.03

Including V.A.T

Lawn Light Deck Mount # LLdmv - IP66

The Lawn Lite Deck Mount version is designed to be mounted into timber decks.
The lamp can be directed up to 20 degrees at a bush, tree, or the outside of a building etc. without the need to remove the luminaire from the deck due to the three vandal-resistant 316 stainless steel allen head screw fixing system which attaches the flange to the body of the luminaire and has a solid bronze or 316 stainless steel flange with a powder coated black body.

This luminaire has a ‘Flush Fit’ lens which stops water pooling and depositing dirt on the lens.

It is solidly constructed from cast aluminium witha UV stable powder coated finish black body with a solid bronze or 316 stainless steel flange. It has a10mm thick ‘Flush Fit’ tempered glass lens and a silicon gasket.

Note: Deck Lite is not suitable for driving over.

Suitable for use with an MR16 - 20 , 35 or 50 watt lamp and is supplied with a high quality European 5000 hour lamp.

Lifetime Warranty on Lens Breakage

Accessories: Cable Joint Kit #CJK150, Frosted Lens #LLFR .

click on image to enlarge

Click here for Light Effect

Download Spec Sheet

Price:

LLdmv

Bronze: £176.25

Stainless Steel: £215.03

Including V.A.T

Inground 1-11 # IG1-11 - IP66 The Inground 1-11 is a flush fitting canister mount 240 volt inground up lighter designed to suit the AR1-11 lamp. This luminaire is ideal for lighting large trees, palms, columns and buildings, etc. The Inground 1-11 is suitable for use with 50, 75 and 100 watt lamps which have a range of beam angles from 4 to 45 degrees and is complete with its own 240 volt a.c integral power supply and thermal overload, and it is dimmable. The luminaire can be driven over (10km max) or walked upon without damaging it and it has a ‘Flush Fit’ lens which stops water pooling and depositing dirt on the lens. The Inground 1-11 is supplied with a mounting canister that facilitates ease of installation which also allows flush mounting with the level of the ground, driveway, pathway, hotel floors or building foyers there is no lip to trip over. Designed so the lamp can be directed (up to 20 degrees) without the need to remove the luminaire from the canister due to the four vandal-resistant allen head screw fixing system which attaches the flange to the body of the luminaire. Solidly constructed from a cast aluminium UV stable powder coated body, with heat dissipation fins to lower operating temperature, with a 10mm thick ‘Flush Fit’ tempered glass lens and silicon gasket. This fitting has a solid bronze or 316 stainless steel flange with a powder coated black body. Suitable for use with AR1-11 - 50 watt, 75 watt or 100 watt lamp and is supplied with a high quality European lamp. Lifetime Warranty on Lens Breakage		click on image to enlarge Click here for Light Effect Download Spec Sheet Price: IG1-11 Bronze: £300.80 Stainless Steel: £341.93 Including V.A.T

Inground 1-11gm # IG1-11gm The Inground 1-11 is a flush fitting canister mount 240 volt inground up lighter. This luminaire is ideal for lighting large trees, palms, columns and buildings, etc. Supplied with a mounting canister allowing flush mounting with the level of the ground. The Inground 1-11gm luminaire has an MR16 lamp in a fully adjustable and lockable gimble for protecting light from 90° to 45° from ground level. Both luminaries are available with a solid bronze or 316 stainless steel flange with a powder coated black body. IP66.		click on image to enlarge Click here for Light Effect Download Spec Sheet Price: IG1-11gm Bronze: £333.70 Stainless Steel: £376.00 Including V.A.T

Stainless Steel Floor light # FL - IP68

The Floor Lite has an 88mm flange which has an extremely low profile (3mm) and can be walked upon without damaging the luminaire.
There are five flange designs:
A) Clover #CL - B) Grill #GR – C) Louvre #LU (45 degree angle)
D) Spot #SP - E) Cross #CR

The luminaire is held into the aluminium mounting canister by two 'O' rings that allows the luminaire to be removed for lamp replacement, hence there are no mounting screws in the flange to spoil the aesthetics of the luminaire.

The Floor Lite is machined from 9mm thick 316 stainless steel and has a tempered glass lens with high temperature silicon gaskets. This luminaire is complete with an aluminium mounting canister, and is supplied with a 20 watt lamp to avoid undue heat generated by the lamp.

A 5 watt self ballasted 240 volt fluorescent option is available which offers excellent light output, low energy usage, long lamp life and very low heat generation this changes the luminaire to an IP56 rating.

Suitable for use with a MR16 - 20 watt and is supplied with a high quality European 5000 hour lamp.

Lifetime Warranty on Lens Breakage

Accessories: Cable Joint Kit #CJK150, Frosted Lens #DFL, Hex Cell Louvre Adaptor #HCL, LED Array #LED, LED 240v Transformer #T/LED (fits in the luminaire), Fluorescent Canister PVC #FLUCAN.

Power Supply - HUNZA® Buriable IG20 safety isolating transformer (single installation) or multi- installation with IG 40, IG100, or IG200 safety isolating transformers, HUNZA® Wall Mount series WM100 - WM300 Double Insulated Safety Isolating Transformers or H20 for internal installation only.

click on image to enlarge

Click here for Light Effect

Download Spec Sheet

Price:

Solid Copper: £160.98

Stainless Steel: £239.70

FLfl

Stainless Steel: £256.15

Including V.A.T

Floor Light Square # Flsq - IP66 / IP68

The Floor Lite Square has an 88mm x 88mm flange which has a low 7mm profile and can be walked upon without damaging the luminaire.
There are five flange designs:
A) Clover #CL - B) Grill #GR – C) Louvre #LU (45 degree angle)
D) Spot #SP - E) Cross #CR

The luminaire is held into the aluminium mounting canister by two 'O' rings that allows the luminaire to be removed for lamp replacement, hence there are no mounting screws in the flange to spoil the aesthetics of the luminaire.

The Floor Lite is machined from 9mm thick 316 stainless steel and has a tempered glass lens with high temperature silicon gaskets.
This luminaire is complete with an aluminium mounting canister, and is supplied with a 20 watt lamp to avoid undue heat generated by the lamp.

Suitable for use with a MR16 - 20 watt and is supplied with a high quality European 5000 hour lamp.

Lifetime Warranty on Lens Breakage

Accessories: Cable Joint Kit #CJK150, Frosted Lens #DFL, Hex Cell Louvre Adaptor #HCL, LED Array #LED, LED 240v Transformer #T/LED (fits in the luminaire), Fluorescent Canister PVC #FLUCAN.

click on image to enlarge

Click here for Light Effect

Download Spec Sheet

Price:

FLsq

Stainless Steel: £252.63

FLsqfl

Stainless Steel: £265.55

Including V.A.T