 |
Light
Ideas Transformers - IP67 Available in 50, 100, 150, 200 and 300 watts each has 1 meter mains and low voltage H05 fly leads. They have a self re-setting thermal cut off to protect against overload and are dimmable from the power source.A fully weather proof joint should connect the cables: we recommend our self adhesive Heat-Shrink or an external weatherproof junction box that can be supplied by your electrician. Product code for ordering: T-50, T-100, T-150, T-200, T-300. Product name/description: (example) Light Ideas Transformer (IP67) - 100w. Associated Products: CJK150 – Cable Joint Kit (contains crimps and heat shrink for one connection).
|
click on image to enlarge
Price: £ LI.20: £27.14 LI.50: £31.02 LI.100: £42.65 LI.150: £49.12 LI.200: £54.29 LI.300: £85.31
|
|
RETRO™ Wall Transformer add /R for RetroWith a built-in electronic transformer, these fittings are designed for installations where mounting the transformer is a problem, e.g. a brick wall where there is only the cable protruding out of the wall and it is not an option to recess the transformer or where you wish to replace an existing light fitting.RETRO™ luminaires are a very economical way to overcome potentially expensive installation problems. The electronic transformers are fully approved and are built into the base, which increases in size to 78mm diameter and 48mm deep. The electronic transformer is 240/250 volt a.c. and
is encapsulated in silicon, it is rated IP66 against water ingress. As the photograph displays, the larger base does not affect the look of the fittings in any way.
|
click on image to enlarge
Price: RT: £23.50
|
|
External Transformer Kit #T-1550-EXTKITIP 67 connection of electronic transformers for exterior lighting. Loop connection of mains voltage onto the transformer (max.8). No need of supplementary junction boxes. Supplied with the correct amount of resin per transformer set. 2 x 70va units per kit. Hardening time 30 min. This innovative new product has many advantages:
Product code for ordering: T-1550-EXTKIT. Product name/description: 2 x 20-70watt
Transformers IP67 - Exterior Kit. |
click on image to enlarge
Price: T-1550-EXTKIT: £68.15
|
|
In-Ground Transformer #IG - IPX7The Inground buriable transformer should be used where a Wall Mount series cannot be installed.Inground Transformers are available in 240v AC 50 Hz and in seven wattages: 20, 40, 50, 80, 100, 150, and 200 watt. Each transformer has an IG designation. Models IG100, IG150 and IG200 have individual 50 watt transformers inside the unit with a single output cable, (e.g. IG100 has two 50 watt transformers) instead of one large transformer. Australian approval number W/2306. These transformers are “Double Insulated Safety Isolating” transformers and are suitable for total burial. The HUNZA® In-ground Transformers have IPX7 water protection. TRANSFORMERS CARRY A FIVE YEAR REPLACEMENT WARRANTY |
click on image to enlarge
IG20: £54.05 IG40: £54.05 IG50: £54.05 IG80: £72.85 IG100: £83.43 IG150: £112.80 IG200: £135.13
|
|
Lighting Transformer #H20 #H40 #H50The HUNZA® H50 Lighting Transformer is designed to operate at the lowest possible temperature.Due to its low profile the H50 can be fitted through a 63mm diameter hole. For internal use only. Input: 230-240 volt 50 Hz. Output: 50 watt 4.2 amp / 40 watt 3.3 amp / 20 watt 2.0 amp. Australian approval number W/2306. TRANSFORMERS CARRY A FIVE YEAR REPLACEMENT WARRANTY
|
click on image to enlarge
Please Contact Us
|
|
RETRO™ Pole Transformer #R - IP56The Retro® mains voltage version is available for the 700mm Bollard,Border Lite, Euro Single and Twin Pole Lites, Single and Twin Pole Lites, Twig Lite, Tier Lite and Walkway Lite.This option is designed for installations where mounting the transformer is a problem and avoids the need to bury a transformer, e.g. where there is a long cable run required and a 240 volt power cable needs to be installed. A situation such as a car park where a ring main has been installed would be ideal for this luminaire. The electronic transformer is a double insulated safety isolating transformer and complies to EMC regulations and has a built-in safety shutdown system if it is overloaded. It will power either 1 x 10 watt, 1 x 20 watt, 2 x 20 watt, 1 x 35 watt or 1 x 50 watt lamps.
|
click on image to enlarge
Price: Please Contact Us
|
|
Wall Mount Transformer #WM - IPX6The HUNZA® Wall Mount Series Transformers have a black glass reinforced UV stabilised nylon case for durability that also maintains a low operating temperature. The transformer is encapsulated into the case for protection against weather and irrigation systems. The transformers are available in 100, 150, 200, 300 watt output. Case material: UV Stable Glass reinforced Nylon 66.Transformer Construction Mounting Terminal Block Size Voltages Conduit Entry Protection Standards TRANSFORMERS CARRY A FIVE YEAR REPLACEMENT WARRANTY |
click on image to enlarge
Price: WM100: £116.33 WM200: £129.25 WM300: £141.00
|
